DONAT STEMSciences and MathsENFR
Chemistry · Simulation and virtual lab Free

Solubility product: when does a precipitate form?

Add a solution drop by drop until the first cloudiness appears, then use your readings to find the solubility product Ksp.

  • Best for S6 · Unit 10: Solubility and solubility product of sparingly soluble salts
  • Also useful S6 · Unit 7: Chemical equilibrium (Le Chatelier and the common-ion effect)
  • Also useful S5 · Unit 11: Solutions and titration (concentrations and dilution on mixing)
You will learn to
  • Write Ksp expressions for salts of the type AB and AB₂.
  • Decide whether a precipitate forms by comparing the ionic product Q with Ksp.
  • Calculate solubility from Ksp and explain the common-ion effect.
You will measure
Volume added at the first precipitate (cm³); concentrations, Q and solubility (mol/dm³).
Time needed
About 35–45 min
Equipment
Nothing extra. Real version: burette, beaker, dilute silver nitrate and sodium chloride (or lead nitrate and potassium iodide), dark background.
Price
Free: no payment, no account.

Simulation

Water from many boreholes in the Eastern Province is “hard”: it contains calcium ions. When it meets sulfate or carbonate, a white solid forms inside kettles and pipes. Chemists predict exactly when such a precipitate will form with one number: the solubility product, Ksp.

Change and observe

Virtual lab

Follow the steps with the simulation above (go back to the simulation ↑). Each time you tap Record, a row is added to the table and a point to the graph.

Aim

To find the concentrations at which a precipitate first forms, to compare the ionic product Q with Ksp, and to see how a common ion lowers solubility.

What to do

  1. Keep Add drops and choose AgCl. The beaker holds 50.0 cm³ of silver nitrate; the burette holds sodium chloride.
  2. Tap Add 1.00 cm³ again and again. Watch the beaker and the ionic product Q. Stop when the first precipitate appears and tap Record.
  3. Tap Empty the beaker. Add 1.00 cm³ portions up to 1 cm³ before that volume, then add 1 drop at a time. Record the last clear reading and the first cloudy reading.
  4. Compare Q just before and just after the precipitate appears with Ksp shown on the screen.
  5. Repeat for BaSO₄, PbI₂ and CaSO₄. For PbI₂, remember that Q = [Pb²⁺][I⁻]².
  6. Choose Solubility with a common ion. For AgCl, record the solubility in pure water and in 0.001, 0.010 and 0.10 mol/dm³ NaCl. What happens to the solubility?

Results

📏 Read the instruments carefully

InstrumentSmallest readingUncertainty
Burette0.10 cm³ (one drop ≈ 0.05 cm³)± 0.05 cm³
Pipette (50.0 cm³ in the beaker)fixed volume± 0.06 cm³

Write every reading with its unit, and with the same number of decimal places as the instrument. Use the 🔍 Magnifier on the picture to read small scales at eye level.

⚠️ Avoid these mistakes

  • Forgetting that mixing dilutes both solutions: use the total volume to find each concentration.
  • Writing Ksp(PbI₂) = [Pb²⁺][I⁻]: the iodide concentration must be squared.
  • Saying a precipitate forms when Q = Ksp: it forms only when Q is greater than Ksp.

✍️ Conclusion

Write your own conclusion first: what do your results and graph show, and which law or principle do they support?

Check your conclusion

A precipitate forms only when the ionic product Q exceeds Ksp. The two readings on either side of the first cloudiness give Q values just below and just above Ksp. In the presence of a common ion the solubility falls sharply, as Le Chatelier’s principle predicts.

Questions

What is the solubility product of a sparingly soluble salt?

It is the product of the concentrations of its ions in a saturated solution, each raised to the power of its coefficient in the equation. For AgCl, Ksp = [Ag⁺][Cl⁻].

When does a precipitate form?

When the ionic product Q of the mixed solution becomes greater than Ksp. If Q is smaller than Ksp the solution stays clear; if Q equals Ksp it is just saturated.

Write the expression for Ksp of lead(II) iodide.

PbI₂(s) ⇌ Pb²⁺(aq) + 2I⁻(aq), so Ksp = [Pb²⁺][I⁻]² (unit mol³/dm⁹).

Ksp of AgCl is 1.8 × 10⁻¹⁰ mol²/dm⁶. Find its solubility in pure water.

s² = 1.8 × 10⁻¹⁰, so s = 1.34 × 10⁻⁵ mol/dm³ (about 1.9 × 10⁻³ g/dm³).

Why is AgCl less soluble in sodium chloride solution than in pure water?

The chloride ions already in the solution (common ion) push the equilibrium AgCl ⇌ Ag⁺ + Cl⁻ to the left (Le Chatelier), so less AgCl dissolves.

Why do we add the last part drop by drop?

The precipitate appears at one exact volume. Large additions jump past it; drops find it within 0.05 cm³, so the concentrations and Q are more accurate.

For teachers: expected results and how the model works

First precipitate (50.0 cm³ in the beaker): AgCl at about 5.6 cm³ of 1.0 × 10⁻³ mol/dm³ NaCl (Ag⁺ 2.0 × 10⁻⁶ mol/dm³); BaSO₄ at about 7.2 cm³; PbI₂ at about 17 cm³ of 0.0100 mol/dm³ KI (Pb²⁺ 2.0 × 10⁻³ mol/dm³); CaSO₄ at about 6.2 cm³ of 0.050 mol/dm³ Na₂SO₄ (Ca²⁺ 0.010 mol/dm³). The model uses Ksp at 25 °C (AgCl 1.8 × 10⁻¹⁰, BaSO₄ 1.1 × 10⁻¹⁰, PbI₂ 9.8 × 10⁻⁹, CaSO₄ 4.9 × 10⁻⁵), dilution on mixing, and solves exactly for the amount precipitated. Real first cloudiness needs a slight supersaturation, so real readings are a little later. Solubility of AgCl: 1.34 × 10⁻⁵ mol/dm³ in water, 1.8 × 10⁻⁷ in 0.001 mol/dm³ NaCl.

Quick check 3 questions · scored

Choose one answer for each question. You see at once if it is right, why, and your score at the end.

1. Ksp(AgCl) = 1.8 × 10⁻¹⁰. In a solution [Ag⁺] = 1.0 × 10⁻⁵ and [Cl⁻] = 1.0 × 10⁻⁶ mol/dm³. What happens?

2. What is the Ksp expression for calcium fluoride, CaF₂?

3. Sodium chloride is added to a saturated solution of AgCl. What happens?

Exam practice Exam set

National-exam style questions on this simulation (16 marks). Try each one on paper first, then open the marking scheme.

The solubility of barium sulfate at 25 °C is 1.05 × 10⁻⁵ mol/dm³. (a) Write the expression for Ksp. (b) Calculate Ksp and give its unit. (4 marks)

Marking scheme: (a) Ksp = [Ba²⁺][SO₄²⁻] (1). (b) Ksp = (1.05 × 10⁻⁵)² (1) = 1.1 × 10⁻¹⁰ (1) mol²/dm⁶ (1).

Equal volumes of 2.0 × 10⁻⁴ mol/dm³ AgNO₃ and 2.0 × 10⁻⁴ mol/dm³ NaCl are mixed. Ksp(AgCl) = 1.8 × 10⁻¹⁰ mol²/dm⁶. Show whether a precipitate forms. (4 marks)

Marking scheme: After mixing each concentration is halved: [Ag⁺] = [Cl⁻] = 1.0 × 10⁻⁴ mol/dm³ (1). Q = (1.0 × 10⁻⁴)² = 1.0 × 10⁻⁸ (1). Q > Ksp (1), so a precipitate of AgCl forms (1).

Ksp of lead(II) iodide is 9.8 × 10⁻⁹ mol³/dm⁹. Calculate its solubility in mol/dm³. (3 marks)

Marking scheme: Ksp = s(2s)² = 4s³ (1); s³ = 2.45 × 10⁻⁹ (1); s = 1.35 × 10⁻³ mol/dm³ (1).

Explain, with an equation, why calcium sulfate is less soluble in sodium sulfate solution than in water. (3 marks)

Marking scheme: CaSO₄(s) ⇌ Ca²⁺(aq) + SO₄²⁻(aq) (1). The added sulfate ions increase [SO₄²⁻] (1), so the equilibrium shifts to the left and more solid forms / less dissolves, keeping [Ca²⁺][SO₄²⁻] = Ksp (1).

Suggest why a Ksp value must always be quoted with its temperature. (2 marks)

Marking scheme: Ksp is an equilibrium constant (1); dissolving involves an enthalpy change, so its value changes with temperature (1).

For class and homework

Teacher resources

The worksheet has the steps, an empty results table and all the questions with answer lines. The marking scheme has the expected results and every answer with its marks.

Keep learning

More free practice: Salts and Solubility (external website, by PhET Interactive Simulations, University of Colorado Boulder). It opens in a new tab.

This simulation is an original model made for Rwandan learners. Real experiments can give slightly different numbers: a simulation never replaces handling real apparatus when your school has it.