Biology · Simulation and virtual lab Free
Respirometer: measure respiration in germinating seeds
Watch a coloured drop move in a capillary tube as seeds take up oxygen, then calculate the rate of respiration and the RQ.
- You will learn to
- Measure the rate of oxygen uptake with a respirometer and a capillary tube.
- Explain the effect of temperature on the rate of respiration.
- Calculate the respiratory quotient and relate it to the respiratory substrate.
- You will measure
- Distance moved by the drop in 5 min (mm); volume and rate of oxygen uptake (mm³/min); RQ.
- Time needed
- About 35–45 min
- Equipment
- Nothing extra. Real version: boiling tube, capillary tube with scale, potassium hydroxide (soda lime), germinating seeds, water bath, thermometer.
- Price
- Free: no payment, no account.
Virtual lab
Follow the steps with the simulation above (go back to the simulation ↑). Each time you tap Record, a row is added to the table and a point to the graph.
Aim
To measure the rate of oxygen uptake by germinating seeds at different temperatures, and to find the respiratory quotient of seeds that store carbohydrate and seeds that store fat.
What to do
- Choose Germinating maize seeds, 25 °C and potassium hydroxide. Tap Close the tap and start. After 5 minutes, read the distance moved by the drop and tap Record.
- Calculate the volume of oxygen taken up: V = πr²d with r = 0.50 mm, then the rate in mm³ per minute.
- Repeat at 10, 15, 20, 30, 35, 40 and 45 °C. Look at the graph of rate against temperature.
- Repeat at 25 °C with the Boiled maize seeds. What is this control for?
- Keep 25 °C. For maize and for groundnuts, record once with KOH and once with water. RQ = (distance with KOH − distance with water) ÷ distance with KOH.
- Compare the RQ of maize and groundnuts with the stored food of each.
Results
📏 Read the instruments carefully
| Instrument | Smallest reading | Uncertainty |
|---|
| Scale on the capillary tube | 1 mm | ± 0.5 mm |
| Thermometer | 1 °C | ± 0.5 °C |
| Stopwatch | 0.01 min | ± 0.01 min |
Write every reading with its unit, and with the same number of decimal places as the instrument. Use the 🔍 Magnifier on the picture to read small scales at eye level.
⚠️ Avoid these mistakes
- Using the distance as the volume: multiply by the cross-section area πr² to get mm³.
- Forgetting the control tube with dead seeds.
- Writing RQ = O₂ ÷ CO₂: RQ is CO₂ given out ÷ O₂ taken in.
✍️ Conclusion
Write your own conclusion first: what do your results and graph show, and which law or principle do they support?
Check your conclusion
With KOH the drop measures oxygen uptake. The rate increases with temperature up to an optimum near 35 °C, then falls as enzymes are denatured; dead seeds take up nothing. Maize (starch) has RQ ≈ 1.0 and groundnuts (oil) RQ ≈ 0.7.
Questions
Why is potassium hydroxide put in the tube?
It absorbs the carbon dioxide given out, so the drop moves only because oxygen is taken up.
Why does the drop move towards the seeds?
The seeds take in oxygen and the CO₂ they give out is absorbed, so the volume (and pressure) of gas in the tube falls and the drop is pushed towards the seeds.
What is the purpose of the boiled seeds?
They are a control: dead seeds do not respire, so any movement would be caused by changes in temperature or pressure, not by respiration.
Why does the rate fall above about 35 °C?
The enzymes of respiration start to be denatured, so fewer active sites work and the rate drops.
What is the respiratory quotient (RQ)?
RQ = volume of CO₂ given out ÷ volume of O₂ taken in. It is about 1.0 for carbohydrate, about 0.7 for fat and about 0.9 for protein.
With water instead of KOH the drop of the maize tube does not move. Why?
For glucose the volume of CO₂ given out equals the volume of O₂ taken in (RQ = 1), so the total volume of gas does not change.
For teachers: expected results and how the model works
Model: 10 g of germinating maize take up 6.0 mm³ O₂/min at 25 °C (38 mm in 5 min in a 0.50 mm radius capillary); Q₁₀ = 2 up to 35 °C (76 mm), then the rate falls as enzymes denature (about 63 mm at 40 °C, 25 mm at 45 °C). Groundnuts respire at 0.9 × maize. With water: maize (RQ 1.0) gives no movement; groundnuts (RQ 0.7) move 0.3 × the KOH distance, giving RQ ≈ 0.7. Boiled seeds: no movement. Readings are rounded to 1 mm, like a real scale.
Quick check 3 questions · scored
Choose one answer for each question. You see at once if it is right, why, and your score at the end.
1. What is the job of potassium hydroxide in a respirometer?
KOH absorbs CO₂, so the drop shows only oxygen uptake.
2. Seeds take in 50 mm³ O₂ and give out 35 mm³ CO₂. What is the RQ?
RQ = CO₂ ÷ O₂ = 35 ÷ 50 = 0.7 (a fat is being respired).
3. The drop moves 20 mm in a capillary of radius 0.5 mm. What volume of oxygen is that?
V = πr²d = 3.14 × 0.25 × 20 = 15.7 mm³.
Your score:
Exam practice Exam set
National-exam style questions on this simulation (16 marks). Try each one on paper first, then open the marking scheme.
In a respirometer with KOH, the drop moved 42 mm in 5 minutes in a capillary of radius 0.5 mm. Calculate the rate of oxygen uptake in mm³ per minute. (3 marks)
Marking scheme: V = πr²d = 3.14 × 0.5² × 42 (1) = 33 mm³ (1); rate = 33 ÷ 5 = 6.6 mm³/min (1).
Explain why the respirometer is placed in a water bath and left for 10 minutes before the tap is closed. (2 marks)
Marking scheme: To keep the temperature constant, because temperature changes the gas volume and the rate of respiration (1); to let the apparatus reach the temperature of the bath / equilibrate (1).
Germinating seeds took up 30 mm³ of oxygen and gave out 21 mm³ of carbon dioxide. Calculate the RQ and suggest the respiratory substrate. (3 marks)
Marking scheme: RQ = 21 ÷ 30 (1) = 0.7 (1); fat/lipid (1).
Describe and explain the effect of temperature from 10 °C to 45 °C on the rate of oxygen uptake by germinating seeds. (4 marks)
Marking scheme: Rate increases with temperature up to about 35 °C (1) because molecules have more kinetic energy and enzyme–substrate collisions are more frequent (1). Above about 35–40 °C the rate falls (1) because enzymes are denatured / active sites change shape (1).
State two sources of error in a simple respirometer and how to reduce each. (4 marks)
Marking scheme: Temperature changes (1): use a water bath / thermostat (1). Leaks at the bung or tap (1): seal with petroleum jelly and check the drop is still when no seeds are present (1). (Also: atmospheric pressure changes — use a control tube with dead seeds.)

Donat Sciences and MathsBiology · Virtual lab worksheet
School: ........................................ Name: ................................ Class: ........ Date: ............
Respirometer: measure respiration in germinating seeds
Aim: To measure the rate of oxygen uptake by germinating seeds at different temperatures, and to find the respiratory quotient of seeds that store carbohydrate and seeds that store fat.
Apparatus (real laboratory): boiling tube, capillary tube with scale, potassium hydroxide (soda lime), germinating seeds, water bath, thermometer.
What to do (with the simulation on www.donatstem.co.rw)
- Choose Germinating maize seeds, 25 °C and potassium hydroxide. Tap Close the tap and start. After 5 minutes, read the distance moved by the drop and tap Record.
- Calculate the volume of oxygen taken up: V = πr²d with r = 0.50 mm, then the rate in mm³ per minute.
- Repeat at 10, 15, 20, 30, 35, 40 and 45 °C. Look at the graph of rate against temperature.
- Repeat at 25 °C with the Boiled maize seeds. What is this control for?
- Keep 25 °C. For maize and for groundnuts, record once with KOH and once with water. RQ = (distance with KOH − distance with water) ÷ distance with KOH.
- Compare the RQ of maize and groundnuts with the stored food of each.
Results
| # | Seeds | T (°C) | Absorbent | Distance in 5 min (mm) | Volume πr²d (mm³) | Rate (mm³/min) |
|---|
| 1 | | | | | | |
| 2 | | | | | | |
| 3 | | | | | | |
| 4 | | | | | | |
| 5 | | | | | | |
| 6 | | | | | | |
| 7 | | | | | | |
| 8 | | | | | | |
| 9 | | | | | | |
| 10 | | | | | | |
| 11 | | | | | | |
| 12 | | | | | | |
Graph
Plot the rate of oxygen uptake (mm³/min) on the vertical axis against temperature (°C). Join the points with a smooth curve and mark the optimum temperature.
Questions
- Why is potassium hydroxide put in the tube? [2]
- Why does the drop move towards the seeds? [2]
- What is the purpose of the boiled seeds? [2]
- Why does the rate fall above about 35 °C? [2]
- What is the respiratory quotient (RQ)? [2]
- With water instead of KOH the drop of the maize tube does not move. Why? [2]
- In a respirometer with KOH, the drop moved 42 mm in 5 minutes in a capillary of radius 0.5 mm. Calculate the rate of oxygen uptake in mm³ per minute. [3]
- Explain why the respirometer is placed in a water bath and left for 10 minutes before the tap is closed. [2]
- Germinating seeds took up 30 mm³ of oxygen and gave out 21 mm³ of carbon dioxide. Calculate the RQ and suggest the respiratory substrate. [3]
- Describe and explain the effect of temperature from 10 °C to 45 °C on the rate of oxygen uptake by germinating seeds. [4]
- State two sources of error in a simple respirometer and how to reduce each. [4]

Donat Sciences and MathsBiology · Virtual lab worksheet
School: ........................................ Name: ................................ Class: ........ Date: ............
Marking scheme: Respirometer: measure respiration in germinating seeds
Expected results
Model: 10 g of germinating maize take up 6.0 mm³ O₂/min at 25 °C (38 mm in 5 min in a 0.50 mm radius capillary); Q₁₀ = 2 up to 35 °C (76 mm), then the rate falls as enzymes denature (about 63 mm at 40 °C, 25 mm at 45 °C). Groundnuts respire at 0.9 × maize. With water: maize (RQ 1.0) gives no movement; groundnuts (RQ 0.7) move 0.3 × the KOH distance, giving RQ ≈ 0.7. Boiled seeds: no movement. Readings are rounded to 1 mm, like a real scale.
Answers
- Why is potassium hydroxide put in the tube? [2]
It absorbs the carbon dioxide given out, so the drop moves only because oxygen is taken up.
- Why does the drop move towards the seeds? [2]
The seeds take in oxygen and the CO₂ they give out is absorbed, so the volume (and pressure) of gas in the tube falls and the drop is pushed towards the seeds.
- What is the purpose of the boiled seeds? [2]
They are a control: dead seeds do not respire, so any movement would be caused by changes in temperature or pressure, not by respiration.
- Why does the rate fall above about 35 °C? [2]
The enzymes of respiration start to be denatured, so fewer active sites work and the rate drops.
- What is the respiratory quotient (RQ)? [2]
RQ = volume of CO₂ given out ÷ volume of O₂ taken in. It is about 1.0 for carbohydrate, about 0.7 for fat and about 0.9 for protein.
- With water instead of KOH the drop of the maize tube does not move. Why? [2]
For glucose the volume of CO₂ given out equals the volume of O₂ taken in (RQ = 1), so the total volume of gas does not change.
- In a respirometer with KOH, the drop moved 42 mm in 5 minutes in a capillary of radius 0.5 mm. Calculate the rate of oxygen uptake in mm³ per minute. [3]
V = πr²d = 3.14 × 0.5² × 42 (1) = 33 mm³ (1); rate = 33 ÷ 5 = 6.6 mm³/min (1).
- Explain why the respirometer is placed in a water bath and left for 10 minutes before the tap is closed. [2]
To keep the temperature constant, because temperature changes the gas volume and the rate of respiration (1); to let the apparatus reach the temperature of the bath / equilibrate (1).
- Germinating seeds took up 30 mm³ of oxygen and gave out 21 mm³ of carbon dioxide. Calculate the RQ and suggest the respiratory substrate. [3]
RQ = 21 ÷ 30 (1) = 0.7 (1); fat/lipid (1).
- Describe and explain the effect of temperature from 10 °C to 45 °C on the rate of oxygen uptake by germinating seeds. [4]
Rate increases with temperature up to about 35 °C (1) because molecules have more kinetic energy and enzyme–substrate collisions are more frequent (1). Above about 35–40 °C the rate falls (1) because enzymes are denatured / active sites change shape (1).
- State two sources of error in a simple respirometer and how to reduce each. [4]
Temperature changes (1): use a water bath / thermostat (1). Leaks at the bung or tap (1): seal with petroleum jelly and check the drop is still when no seeds are present (1). (Also: atmospheric pressure changes — use a control tube with dead seeds.)